Dwight's Craft
Nuclear Blast Mushroom Cloud Lamp | Wasteland & Tabletop RPG Gaming Decor
Nuclear Blast Mushroom Cloud Lamp | Wasteland & Tabletop RPG Gaming Decor
Couldn't load pickup availability
Exclusive to Dwight’s Craft, proudly presenting the Atomic Nuclear Blast Table Lamp.
When the horizon lights up, it’s already too late.
Bring a little wasteland atmosphere to your gaming table. My Nuclear Blast Mushroom Cloud Table Lamp combines a bold mushroom-cloud silhouette, a hammered-style textured finish, and warm amber illumination in a compact, 3D-printed display piece.
Switched off, its rounded dome and dark industrial-style base make a distinctive statement. Switched on, the dome and middle section glow from within, setting the scene for tabletop RPG adventures, post-apocalyptic campaigns, or a quiet evening in your favorite corner.
Display it beside your campaign books, on a collector shelf, or in your gaming room or office. At approximately 8.5 inches tall and 8.75 inches across, it brings nuclear drama without taking over your space. This is an atmospheric accent light, rather than a reading lamp.
Details at a Glance
- Dimensions: Approximately 8.75 inches in diameter × 8.5 inches high.
- Material: PLA Plus, with a soft velvet bottom.
- Finish: Hammered-style texture on the dome and middle section.
- Lighting: Replaceable G9 LED bulb, 4W, 3000K.
- Power: Standard 120V wall outlet.
- Cord: Approximately 6 feet, with an in-line ON/OFF switch.
- Assembly: Arrives fully assembled.
From a Customer’s Idea to a Dwight’s Craft Creation
This piece began when a customer came to Dwight’s Craft with an idea for a custom design. Working from his concept and reference photos, I developed the lamp through modeling, prototyping, and refinement until it became the illuminated piece you see here.
Approximately 60 hours went into design, development, and trial print settings, using multiple 3D modeling programs to create and refine the individual components before production.
Made with Time and Attention
Each lamp requires approximately 89 hours of total printing. I use fine-detail print settings to capture the texture, contours, and character of the design, giving each component the time and attention it deserves.
A soft velvet bottom helps protect your display surface, while the replaceable G9 LED bulb lets you change the light source when needed instead of replacing the entire lamp.
Care & Handling
- This is a decorative collector/display piece, not a toy. Keep away from children.
- Use indoors only. Keep away from excessive heat and open flames.
- Dust lightly with a soft, dry cloth or soft detailing brush. Avoid harsh cleaners, soaking, excessive moisture, and aggressive scrubbing.
- Do not operate continuously 24/7. Limit use to a maximum of 12 hours at a time, then turn off and allow the lamp to cool completely before further use.
- Always support the lamp from underneath when moving it. Do not lift it by the dome or middle section.
Assembly & Access
Your lamp arrives fully assembled, with no assembly required. Its sections can be separated when needed for cleaning, maintenance, or access to the lighting components. Handle each section carefully.
Bottom & Middle Section
The pins pass through the bottom section and the corresponding holes in the three legs of the middle section. They provide an additional precaution if the lamp is bumped; they do not lock or secure the sections together.
If you separate these sections, carefully align all three legs with their corresponding openings before reassembly. The fit is intentionally snug. Gently work the bottom section into position without forcing it, as misalignment can damage or break the legs. Reinsert the pins only after the sections are properly seated.
Dome
The dome rests on small positioning balls; it does not lock or fasten to the middle section. To replace it, line up the red mark on the dome with the red mark on the middle section, then gently set it into place.
Accessing & Replacing the Bulb
Switch off and unplug the lamp, and allow it and the bulb to cool completely before opening or handling the lighting components.
Preferred access method: Remove the dome to access the bulb through the opening. This avoids separating the bottom and middle sections.
Alternate access method: Separate the bottom from the middle section to reach the bulb. Follow the three-leg alignment instructions above when putting the sections back together.
The lamp uses a replaceable 4W, 3000K G9 LED bulb. Handle the sections carefully throughout the process and support the lamp from underneath.
Independent Fan-Inspired Design Notice
This independently produced Dwight’s Craft piece began as a custom concept from one of my customers and was further inspired by the retro-futuristic, post-apocalyptic wasteland aesthetic popularized by games such as Fallout 4.
This product is not affiliated with, endorsed by, sponsored by, or officially licensed by Bethesda Softworks. Fallout and Fallout 4 are trademarks and/or intellectual property of their respective rights holders.
Dwight’s Craft makes no claim of ownership to the Fallout franchise or Bethesda Softworks. References are used solely to describe the general artistic inspiration and genre associated with the piece.
Share























